VCDS® WITH HEX-NET® ENTHUSIAST USB & WIFI INTERFACE (10 VIN)
VCDS® with HEX-NET® Enthusiast USB & WiFi Interface
Enthusiast version for use with a maximum of 10 VIN numbers.
Our latest top-selling product comes in its own carry case ready to go.
The HEX-NET Enthusiast WiFi interface works with VCDS®, via USB or WiFi, turning a Windows PC into a factory-level diagnostic tool for VW, Audi, Seat or Skoda cars. It also has VCDS-Mobile® built in to allow most smart devices with WiFi and a web browser to perform similar diagnostics as a bonus.
3 in stock
VCDS® with HEX-NET® Enthusiast USB & WiFi Interface
Enthusiast’s version for use with a maximum of 10 VIN numbers.
The HEX-NET Enthusiast WiFi Interface works with VCDS®, via USB or WiFi, turning a Windows PC into a factory-level diagnostic tool for VW, Audi, Seat or Skoda cars. It also has VCDS-Mobile® built in to allow most smart devices with WiFi and a web browser to perform similar diagnostics as a bonus.
VCDS compatible with:
Microsoft Windows® versions from XP through the current Windows 10
VCDS-Mobile Compatible with:
Apple iPad®, iPhone®
Most Android®phones and tablets
Blackberry Z10®, Q10®
Microsoft Surface®& Windows Phone®
Please note: VCDS-Mobile is currently still considered a “beta” release and so should not be relied upon on its own. If performing an essential task on a vehicle we would recommend having a Windows laptop available as a backup.
Technical support for VCDS-Mobile is only available through the Ross-Tech Forums <link to forums.ross-tech.com>
Plugs directly into 1996 through current model year cars; works with all diagnostic-capable VW/Audi cars, even the latest models which require a direct CAN connection and use the UDS/ODX protocol.
VW/Audi/Seat/Skoda cars with the 16-pin diagnostic socket including models using CAN and UDS/ODX protocols
Lamborghini Gallardo (LP models), Aventador, Huracan
Pre-1995 VW/Audi cars, when used with a 2×2 adapter (supplied separately)
Acts as a “dongle” — activation for the full-function version of VCDS and for VCDS-Mobile is built in. Use the HEX-NET with VCDS on a Windows PC or with VCDS-Mobile on almost any smart device, no activation codes required.
VCDS Windows Desktop Software
Using the system on a Windows PC, you can:
Read and clear fault codes from all systems within the car, e.g. engine, airbag, ABS, instruments, parking sensors etc.
View live data from the sensors within the car
Reset service lights (both fixed and variable service intervals)
Read stored and intermittent fault codes
Graph and log live data with the car running
Automatically read fault codes from all car systems in a single search
Perform basic setting functions, adaptations and soft coding
Activate service functions, such as Electronic Park Brake (EPB) to allow brake pad changes
Support bi-directional output test and component actuation
View over 20,820 fault code definitions
Free software updates
Functions like a factory diagnostic tool.
Support through Ross-Tech forum.
This system does NOT include vehicle diagnosis support via the telephone. Live telephone technical support for vehicle diagnosis is available separately, please see below link for details Ross-Tech Technical Support.
We ship to valid UK postcodes only. Please see Ross-Tech site for distributor list in other countries.
Before you purchase this product, please read the HEX+NET FAQs and the VCDS Mobile FAQs so that you understand this product, what’s required to use it, and what its limitations are. Please use the link below.
The HEX-NET is fully supported via e-mail or over the phone as a USB interface for VCDS. Support for WiFi configuration and VCDS-Mobile are provided via our support forum, in English only (see link below). If you are unwilling or unable to participate in the forum in English, you should not buy this product to use VCDS-Mobile at this time. Please wait for the official release when you will be able to work with a local distributor and in your own language.
If you would like to register for the forums, you may use your serial number to become a ‘Verified Member’.
Vehicle Identification number or more commonly a chassis number, in order to perform more complex functions, you will be required to store a VIN number to proceed.
VCDS will always ask beforehand, so depending on what you are trying to do, you can make the decision then.
This is the maximum number of vehicles you can work on with full functionality, as previously mentioned when you need store a VIN it will be permanently embedded and cannot be deleted, each of the kits can be upgraded to its next level, this is done directly with Ross-tech on their website at an extra cost.
You will only be able to use basic functions of VCDS on any other vehicle, other than the ones stored – operations like scanning, fault finding and clearing codes, anything that requires entering a control module will not be possible. You will need to purchase an upgrade from Ross-Tech to work on more vehicles, which is handy if you do not wish to spend a lot initially and do not mind upgrading your lead during the many years you use it.
All kits perform eXactly the same full functionality, the only difference is the VIN storage limitation and the ability to use the full functions with vehicles – Unlimited kit has no storage limitation, so is naturally the most expensive.
All updates to VCDS software and firmware are free as and when Ross-Tech release them, as long as the laptop or device is connected to the internet, it will ask you to update. Firmware update are done slightly different, we include a handy for video for this on the memory stick provided, so there nothing else to pay for.
All new V2 leads must now be registered with Ross-Tech after 12 uses, included on the memory stick is a video on how to do this.
The lead is supplied with a 12-month hardware warranty. As now all leads must be registered you can then also register on the Ross-Tech.com forums to post any issues direct to Ross-Tech, you may have with your VCDS, they in turn will contact the distributor you purchased the lead from to help with support.
Yes, you can, but contact us beforehand to arrange current pricing and details of where to send your old lead to. If a lead is accepted for refund, as we can only accept genuine and fully working version, we will refund this price back to your original payment for the new V2 VCDS purchased with us
8 in stock
7 in stock
10 in stock
Send us your details in the form below and a member of our team will call you as soon as possible. If you would like to speak to us straight away, call +44 (0)1491 834666. We are here Mon – Fri 08:00-17:00