Official Ross-Tech OBD-II extension 900mm cable.
High-quality finished cable to allow extra 900mm of reach inside the vehicle and will allow you to place your Hex-Net safely on the dashboard of the vehicle you are working on, to view its activity lights with ease and also to avoid leaving it plugged in after you have finished the work and returned the vehicle to the customer. One end also has a 90 degree angle for ease of plug in.
16PIN OBD-II Female (90 deg angle) to 16PIN OBD-II Male (straight)
-
Condition:New
-
Product Code:OBDEXT-1A
-
Weight:0.17kg
Frequently Asked Questions
Vehicle Identification number or more commonly a chassis number, in order to perform more complex functions, you will be required to store a VIN number to proceed.
VCDS will always ask beforehand, so depending on what you are trying to do, you can make the decision then.
There is a maximum number of vehicles you can work on with full functionality, as previously mentioned. When you need to store a VIN it will be permanently embedded and cannot be deleted. Each of the kits can be upgraded to its next level, this is done directly with Ross-Tech on their website at an extra cost.
You will only be able to use basic functions of VCDS on any other vehicle, other than the ones stored - operations like scanning, fault finding and clearing codes, anything that requires entering a control module will not be possible. You will need to purchase an upgrade from Ross-Tech to work on more vehicles, which is handy if you do not wish to spend a lot initially and do not mind upgrading your lead during the many years you use it.
All kits perform exactly the same full functionality, the only difference is the VIN storage limitation and the ability to use the full functions with vehicles - Unlimited kit has no storage limitations, so is naturally the most expensive.
All updates to VCDS software and firmware are free, as and when Ross-Tech release them, as long as the laptop or device is connected to the internet, it will ask you to update. Firmware updates are done slightly differently, we include a handy video for this on the memory stick provided, so there is nothing else to pay for.
All new V2 leads must now be registered with Ross-Tech after 12 uses. Included on the memory stick is a video on how to do this.
The VCDS lead is supplied with a 12 month hardware warranty. You can also register on the Ross-Tech's forum to post any issues that you may have with your VCDS, directly with Ross-Tech, they in turn will contact the distributor you purchased the lead from to help with support.
Yes you can, but contact us beforehand to arrange current pricing and details of where to send your old lead, if a lead is accepted for refund, as we can only accept a genuine and fully working version. We will refund this price back to your original payment for the new V2 VCDS purchased with us.
ENGINES
FUEL SYSTEMS
ENGINES
FUEL SYSTEMS
